How to Use A Whip-Style Vaporizer

April 08, 2019 Dry Herb Vaporizers

How to Use A Whip-Style Vaporizer

Whip-style desktop vaporizers have attachments called whips that you draw vapor from. It’s the first design for desktop vaporizers and the simplest to use. Modern changes in the unit made it even easier for a beginner to use it without spending too much time learning how to use a whip-style vaporizer. Today we’ll teach you how to use your whip vaporizer, using the Arizer V-Tower Desktop Dry Herb Vaporizer as a reference.

How a whip-style vaporizer works

Your Arizer V-Tower Desktop Dry Herb Vaporizer is designed to vaporize your herbs through convection. Dry air circulates in the ceramic heating chamber as you draw from the hose. Since the unit does not have a fan, the force of your inhalation through the whip will be the one to drive the hot air.

A neat feature of the Arizer V-Tower is the LCD display which shows both previous and present temperature settings. You can quickly decide which temperature setting will give you the best vaping experience with less trial and error. The unit can go from 122°F to 500°F through selection buttons at the side of the display. Once you set your desired temperature, it will take the Arizer V-Tower about 2 minutes to get ready.

How to Use A Whip-Style Vaporizer

  1. Check all the parts of the unit, especially the whip. Check for holes on the whip or anything that can negatively affect your vaping experience.
  2. Turn on the unit. Although the Arizer V-Tower Dry Herb Desktop Vaporizer takes a minute or two to heat up, some take about 5-10 minutes.
  3. Grind your herb while waiting. It should be in a fluffy consistency, but not too fine.
  4. Place the metal screen inside the bowl of the wand. Depending on the unit, you may need to inhale through the glass wand or scoop up your herb.
  5. Fill up to two-thirds of the way. Tamp the wand lightly to allow hot air to circulate.
  6. Adjust the temperature of your desktop vaporizer. Set the knob of an analog vaporizer in the middle. For digital vaporizers, 350°F is the ideal temp. Low temp gives you thin but flavorful vapes. Set it higher if you want full, strong hits. Experiment until you get the temperature that appeals most to you.
  7. Insert the wand in the vaporizer and attach the whip.
  8. Draw from the mouthpiece until you taste the vapor. You can draw as much vapor as your lungs can take. If using for the first time, take small draws until your body adjusts to the vapor.
  9. Mix the herb inside the wand to distribute the heat and vaporizer your herbs evenly.

Things to consider:

  • You should taste the full flavor of your concentrate. If you start to smell and taste burnt popcorn, this means you are done with the herbs.
  • Always clean your whip regularly. Soak the tube in hot water for 5 minutes to loosen it up so you can remove the elbow adapter easily.
  • Use the aroma dish and fill it potpourri to eliminate any smell left from your vaping session.

Using a whip-style vaporizer is simple, convenient, and easy to use. If you have questions about how to use a whip-style vaporizer, please feel free to ask us in the comment section!

Sharing:

Leave a Reply





Contact

Get in Touch

We love your feedback, Drop us a line
css.php